Load data for .30 PICRA + .308 | 150gr | Barnes X S

Recommended Powder(s): none

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 150gr \| Barnes X S
Manufacturer SKU:	30815
Bullet Weight:	150gr \| 9.7g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	1.205" \| 30.6mm
Caliber:	.30 PICRA load data
Case Length (l3):	1.291" \| 32.8mm
Cartridge Length (C.O.L.):	2.172" \| 55.2mm
Seated Depth:	0.324" \| 8.2mm
Shank Seated Depth:	0.324" \| 8.2mm
Case Capacity:	24.2 Grains of Water \| 1.57 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	40611 psi \| 2800 bar
LID:	LID_B613_C311
Last updated:	2025-01-01

Load data for 48 loads in caliber .30 PICRA with .308 | 150gr | Barnes X S bullet and 24 powders such as none. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	72%	35563	88%	**30	100%
ADI APS 450	<<locked>>	64%	36376	90%	**20	100%
Accurate 4100	<<locked>>	73%	36535	90%	**22	90%
[Accurate No. 11 FS]*	<<locked>>	82%	35752	88%	**29	83%
Accurate No. 9	<<locked>>	63%	36332	89%	**06	96%
Accurate TCM	<<locked>>	63%	36245	89%	**09	97%
Alliant 2400	<<locked>>	69%	35636	88%	**12	93%
Alliant BLUE DOT	<<locked>>	73%	36347	89%	**99	98%
[Hodgdon H110]*	<<locked>>	77%	35476	87%	**39	87%
Hodgdon LilGun	<<locked>>	79%	35853	88%	**81	93%
Hodgdon TrailBoss	<<locked>>	93%	25440	63%	**2	100%
Maxam CSB 1	<<locked>>	64%	35868	88%	**99	100%
Ramshot Enforcer	<<locked>>	69%	35157	87%	**12	94%
ReloadSwiss RS 14	<<locked>>	94%	25077	62%	**5	100%
ReloadSwiss RS 30	<<locked>>	94%	35723	88%	**68	90%
SNPE Vectan A0	<<locked>>	63%	35288	87%	**29	100%
SNPE Vectan BA6 1/2	<<locked>>	94%	34751	86%	**12	96%
SNPE Vectan BA7 1/2	<<locked>>	65%	34751	86%	**78	100%
[Somchem S265]*	<<locked>>	85%	36506	90%	**99	86%
Vihtavuori 3N38	<<locked>>	68%	35607	88%	**60	100%
Vihtavuori N105	<<locked>>	71%	35447	87%	**80	100%
Vihtavuori N110	<<locked>>	87%	35853	88%	**39	94%
Vihtavuori N32C Tin Star	<<locked>>	76%	34708	85%	**1	100%
[Winchester 296]*	<<locked>>	76%	35679	88%	**65	83%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	62%	27267	67%	**15	100%
ADI APS 450	<<locked>>	60%	33620	83%	**1	100%
[Accurate 4100]*	<<locked>>	61%	25251	62%	**38	84%
[Accurate No. 11 FS]*	<<locked>>	79%	32227	79%	**73	81%
Accurate No. 9	<<locked>>	61%	34490	85%	**86	95%
Accurate TCM	<<locked>>	61%	34374	85%	**76	96%
Alliant 2400	<<locked>>	61%	28790	71%	**01	90%
Alliant BLUE DOT	<<locked>>	61%	27195	67%	**52	95%
[Hodgdon H110]*	<<locked>>	66%	26165	64%	**78	81%
[Hodgdon LilGun]*	<<locked>>	61%	21045	52%	**09	83%
Hodgdon TrailBoss	<<locked>>	60%	14881	37%	**9	100%
Maxam CSB 1	<<locked>>	61%	33243	82%	**66	100%
Ramshot Enforcer	<<locked>>	61%	28311	70%	**04	90%
ReloadSwiss RS 14	<<locked>>	62%	14953	37%	**2	100%
[ReloadSwiss RS 30]*	<<locked>>	78%	23801	59%	**48	81%
SNPE Vectan A0	<<locked>>	60%	32822	81%	**99	100%
[SNPE Vectan BA6 1/2]*	<<locked>>	61%	15998	39%	**2	82%
SNPE Vectan BA7 1/2	<<locked>>	60%	30458	75%	**22	100%
[Somchem S265]*	<<locked>>	73%	27296	67%	**55	81%
Vihtavuori 3N38	<<locked>>	61%	29356	72%	**75	99%
Vihtavuori N105	<<locked>>	61%	27137	67%	**58	100%
[Vihtavuori N110]*	<<locked>>	61%	18608	46%	**10	82%
Vihtavuori N32C Tin Star	<<locked>>	61%	25947	64%	**9	100%
[Winchester 296]*	<<locked>>	73%	32300	80%	**09	81%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data